Hardware Parameters
CPU:Allwinner V3S, ARM Cortex-A7, 1.2GHz max
Memory:64MB DDR2 integrated
Storage:
- SOP8 SPI Flash for boot (Reserved)(8~32MB SPI Nor Flash,128MB Nand Flash customizable)
- TF Card Slot for boot.
Display Information
- General 40P RGB LCD FPC:
- Direct plug 40P 4.3/5/7 inch LCD(onboard backlight driver)
- plug 50P 7/9inch LCD via converter board
- Supported resolutions: 272x480, 480x800,1024x600
- Onboard RTP chip, supports a touch screen
- OnBoard RGB LED
Communication Interface
- SDIO x2,(connect to SDIO WiFi+BT module)
- SPI x1
- I2C x2
- UART x3
- 100M Ether x1(include EPHY)
- OTG USB x1
- MIPI CSI x1
Other Interface
- PWM x2
- LRADC x1
- Speakerx2 + Mic x1
Electrical Information and Characteristics
- Power Input: Micro USB 5V; 2.54mm pins 3.3V~5V; 1.27mm holes 3.3V~5V
- Power Output: 3.3V and 3.0V(AVCC)
- 1GHz linux IDLE run 90~100mA; cpu-burn run ~180mA
- Storage Temperature -40~125℃
- Operating Temperature -20~70℃
- Size: 44.6x25.5mm
Data Sheets and Additional Information
NetDisk:http://pan.baidu.com/s/1eR6uIsy
Datasheet:http://ilichee.cc/doc/V3S/Allwinner_V3s_Datasheet_V1.0.pdf
SCH:https://licheepizero.us/downloads/lichee_zero.pdf
PCB Lib:http://ilichee.cc/doc/SCH_PCB/Zero.IntLib
Read more about the Lichee Pi Zero project at Indiegogo